Range Rover Evoque Spezifikationen Seite 90

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 299
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 89
L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Stability control
90
Stability control
DYNAMIC STABILITY CONTROL
(DSC)
Dynamic Stability Control (DSC) is
unable to compensate for driver
misjudgement. It remains the driver's
responsibility to drive with due care
and attention, in a manner which is
safe for the vehicle, its occupants and
the other road users.
This vehicle is not designed for
cornering at the same speed as
conventional passenger cars any
more than a low-slung sports car is
designed to perform satisfactorily
under off-road conditions. If at all
possible, avoid sharp turns or abrupt
manoeuvres. As with other vehicles of
this type, failure to operate the
vehicle correctly may result in loss of
control or vehicle rollover.
DSC maintains vehicle stability, even in critical
driving situations, when accelerating and when
starting from a standstill. Additionally, it
identifies unstable driving behaviour, such as
understeer and oversteer and helps to keep the
vehicle under control by manipulating the
engine output and applying the brakes at
individual wheels. Some noise may be
generated when the brakes are applied.
SWITCHING DSC OFF
Safety may be reduced by
inappropriately disabling DSC. In the
majority of driving situations, and
particularly on-road, it is
recommended that you do not disable
DSC.
DSC must be switched off when
traction devices are fitted. See 235,
USING SNOW CHAINS.
In some driving conditions it may be
appropriate to disable DSC to improve traction.
These conditions include:
Rocking the vehicle out of a hollow or deep
rut.
Pulling away in deep snow, or when on a
loose surface.
Driving through deep sand or mud.
To disable DSC, press and briefly hold the DSC
OFF switch. The DSC OFF warning lamp will
illuminate. See 90, DYNAMIC STABILITY
CONTROL (DSC). Deactivating DSC also
reduces the level of Electronic Traction Control
(ETC) intervention and may lead to an increase
in wheel spin.
SWITCHING DSC ON
Note: DSC is enabled automatically at the start
of each ignition cycle.
Press and briefly hold the DSC OFF switch to
re-enable DSC. Alternatively, select a new
Terrain Response special programme.
Note: DSC is automatically disabled when the
ignition is switched off.
Seitenansicht 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 298 299

Kommentare zu diesen Handbüchern

Keine Kommentare